AP 02 Plastic Diaphragm Pump
The AP 02 Plastic Diaphragm Pump is an air-operated diaphragm pump with a plastic housing, featuring a 1/4"-1/2" threaded connection and a capacity range of 0–16 L/min.
Its operating principle relies on compressed air alternately moving two diaphragms; this seal-less design eliminates the risk of leakage. The pump is self-priming, resistant to dry running, and its flow rate can be continuously adjusted with air pressure.
The pump housing is available in polypropylene or PVDF (Kynar); options for the diaphragm and internal components in contact with the fluid include Neoprene, Buna-N, Teflon, Viton, Santoprene, and EPDM.
The correct combination can be selected based on the chemical being pumped; the PVDF (Kynar) option provides high resistance to aggressive chemicals, while the polypropylene housing is suitable for transferring acids and alkalis.
The maximum suction head is 6–8 m, and the discharge head is 0–84 mss; it can be used with liquids containing solids up to 1 mm in diameter.
The operating air pressure is 0–8.4 bar, the air connection is 1/4", and the air consumption is specified as 1.8–10 m³/h.
The plastic-bodied series serves as an alternative to metal-bodied pumps for the transfer of corrosive liquids.
- 0 - 16 lt/dk Capacity Range
- 0–84 ms Discharge Head
- 1/4"-1/2'' Connection Inlet-Outlet
Technical Info
Technical Specifications
| Connection Inlet-Outlet | 1/4"-1/2'' |
|---|---|
| Connection Type | Gear |
| Capacity Range | 0 - 16 lt/dk |
| Discharge Head | 0–84 ms |
| Max. Suction Lift | 6 - 8 m |
| Max. Solids Size | 1 mm |
| Pump Body Materials | Polypropylene, PVDF (Kynar) |
| Pump Internal Materials | Neoprene, Buna-N, Teflon, Viton, Santoprene, EPDM |
| Air Connection | 1/4" |
| Air Operating Pressure | 0–8.4 bar |
| Air Consumption | 1,8 - 10 m3/h |
Similar Products
